E320:(config)#
#Calculate local Pool before configure (first address, last address, and mask)
#Putting ip local pool command
#Eg.
IP local pool (name)meganfox (start ip )110.xxx.xxx.65 (end ip)110.xxx.xxx.126
#Configuration loopback address for ip pool
#Eg.
IP address (first address of ip pool1)110.xxx.xxx.65 (full mask)255.255.255.255
#Putting route for the IP pool
#Eg.
Ip route (network ip)110.xxx.xxx.64 (netmask)255.255.255.192 (null interface)null0
#Setting Route Map for IP pool
Eg.
ip prefix-(list or tree) "(name)" permit (network) 110.xxx.xxx.64/26
ၿပီးေတာ႕ Verify လုပ္ၾကည္႕ပါတယ္။
#Verifying the newly add pool
Eg.
Show ip local pool | inc 110.xxx.xxx.xxx
#Verifying route for newly added pool
Eg.
Show ip bgp | inc 110.xxx.xxx.xxx
====
တကယ္တမ္း Configure လုပ္ရတာေလးက ေအာက္ကဟာေလးပါပဲ။
vi LoiKaw
config t
interface loopback 0
ip address 110.xxx.xxx.66 255.255.255.255 secondary
ip local pool MeganFox 110.xxx.xxx.66 110.xxx.xxx.126
router bgp 65114
network
110.xxx.xxx.64 mask 255.255.255.192
ip route 110.xxx.xxx.64 255.255.255.192 null0
